Call Point Anti-tamper Cover Seal is used to protect addressable waterproof call points.

Dual Action Cover is used for BNG

Intevio extension keypads are for use with remote call stations. Models available with four function buttons/LED indicators, and eight function buttons/LED indicators.

GR-1 is Break Glass Tube for BRG-14 mm.

The BRKG-B Breakglass Insert Includes a tempered glass plate, a hammer attached to a chain, and a screw to attach the hammer to the trim ring.

The Fire-Lite backboxes are surface mount backboxes for the fire-lite BG-8 series pull stations.

The DMK18 Digital Key Modules have been designed to be used for extending VARIODYN D1 Digital Call Stations upto 300m via Cat5 cables.

KAC Call Point Pattress Boxes are great deal more than an alternative to a surface mounting boxes. They are designed to accept installation cables, that enter the device without use of bulky cable terminations.

Keyguard graphic windows is spare plastic Windows (Pack Of Four) Fits all KEYGUARD Products.

Keyguard is a unique plastic emergency key box designed to retain a key or access control card and is a more safe way than the traditional break glass key box.

Agent Release Stations are designed for use with Fire-lite Fire Alarm Control Panels with releasing capabilities and RP Series Releasing Systems.

Call point cover seal - Pack of 5 non World Series (Old PN: P 056)

The R5A-RF radio call point is a battery operated RF device designed for use with the M200G-RF radio gateway, running on an addressable fire system. It is a waterproof manual call point, combined with a wireless RF transceiver.

Consumable used in Chemcassette® paper tapes based single and multipoint gas detection systems

The Zener Barrier is used for connection of conventional ex manual detectors up to TAL module or conventional input directly on Delta DA Apollo and Delta DA Quad.

Miniature Momentary Action Push Switches are flush mounted and consist of ABS material. Miniature Push Switches are terminated and available in blue colour.

White Miniature Push Switches are contained plain colour function label. All miniature push switches are flush mount.

The Insulator barrier and protocol converter are used as a divider in safe and classified area.

Manual Caller Back Box which can be surface mounted and used for old detectors.

SD500 backplates trim rough openings for the SD500-PS and SD500-PSDA addressable pull stations.

Universal Alarm Button are to be installed in extreme environments where the impact of water and dust occurs

Out of order sign, multilingual 7047xx, 7048xx and 70490x

Surface mount housing for small MCP, red, similar to RAL 3020

Key for Large MCP

Replacement Glass for Fire Fighter Telephone Cabinet.

10340/1 is Firefighter Key according to Nordic standard for Delta and ANX 95.

Spare Glass Panes are printed with red circle segments (similar to RAL 3000) for all Part No. 7047xx and Part No. 7048xx manual call points (large design).

KAC’s range of switches provide you with the most comprehensive range of switching product solutions for fire, security and other specialist applications.

Protective Cover for Manual Call Points is Protective housing with protruding roof edge, for all detector housing for increased mechanical protection as well as for protection from bad weather conditions.

Spare glass pane by Esser has a white stick-on foil and printed pictogram and is an integral part of small Manual Call Point.

MP120K mounting plates are designed to use 120V AC to power SpectrAlert® Advance horns, strobes, horn strobes, chimes, and chime strobes.

MP120KL mounting plates are designed to use 120V AC to power L-Series horns, strobes, horn strobes, chimes, and chime strobes.

The Notifier N-MPS Addressable Series manual pull station provide reporting for the NFS-320C, NFS-640, and NFS-3030 fire alarm control panels. Available as single or two-stage.  English/French lettering.

Weatherproof cover designed to protect call points and other devices against the ingress of dust or water. It is a protective cover that is ideal for extending the life and reliability of weather exposed devices, such as manual call points

The Separately accessory for a calling kit (for spare parts or replacement).Fully autonomous ringing kit for equipping bathrooms for people with limited mobility. One call point, one display point and power supply.

Red Lid is used for detector buzzer SQM.

Spare glass pane for small MCP, EN54

Installation Kit for Redundant DCS are needed to install a paging microphone in a table surface or the 19" panel (Part No. 583709).

The M700KACI-FG with integral isolator, is a call point designed to provide a manual alarm interface to Notifier’s fire alarm control panel. 

Addressable manual pull stations are a single action or dual action addressable manual fire alarm pull stations for use with IntelliKnight® fire control panels.

Addressable MCP, IP66

Front Foil with Universal Text for the labeling field, different from the standard version.

Key Switch is single pole switch having 240VAC and 2A, Voltage and current rating respectively. It has 87 x87x 52mm dimension and it is made up of ABS material.

An Intrinsically Safe version of our MCP3A indoor call point is available for installation in hazardous areas. The MCP3A product version is supplied with both a resistor and normally open clean contact electrical options

The accessories are introduced for MGN under the VoCALL System range.

Dual-Action Agent Release Stations are designed for use with the Gamewell-FCI fire alarm control panels with releasing capabilities and Flex Series releasing systems.

IQ8 Manual Detector has rear box with nipple. It is recommended to use a rear box with nipple in all demanding environments.

Manual weather shelter for protection in exposed areas. It increases the degree of tightness for manual call points to IP 43 and is delivered without back box.

The Manual Call Points by Eltek are apollo XP95 manual call point with hinged cover is to be used together with addressable apollo detectors.

PS-GR12 scored acrylic break rods are for use with Silent Knight® die-cast metal manual pull stations. They are sold in a box of 12.

PS-WPB weatherproof boxes are for use with Silent Knight® die-cast metal manual pull stations.

PS-BB backboxes are for use with Silent Knight® die-cast metal manual pull stations.

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Break Glass Unit is a weatherproof emergency door release and is available as single and double pole.

KAC Plastic plugs used for external ROP, KAC buttons installed in unused openings for glands in the button housing, Package 20 pcs.

Keyguards are custom designed plastic box to which a clear plastic window can be fitted in order to retain a key or access control card. Keyguard recess enables the operator to remove the window in an emergency to retrieve the key.

The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.

Manual Call Point for indoor use, supplied with rear box for surface mounting.

MCP housing large with glass pane

Keyboard Cover for DCS VARIODYN D1 call station is a transparent key cap to protect from accidental key presses. So, pressing the keys is only made possible with an open cap.

The Call Points are available with or without an integral isolator and are designed to provide a manual alarm interface to Notifier fire alarm control panels where additional protection against the environment is necessary.

DKM18 Digital key module has 18 freely configurable keys and 18 LEDs.Up to 6 of these DKM18 key modules can be connected to a redundant DCS15 or DCS2.

DCSF Enclosure is a wall enclosure manufactured out of sheet steel for the inclusion a firefighter paging microphone DCSF12 or DCSF 1

17003 key sets (two keys) for Fire-Lite® BG-12LX addressable manual pull stations.

10-LA0015-01 is replacement key to open detector.

SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Surface Mounting Boxes by KAC are providing a unique ˜plug and play™ concept designed specifically to reduce installation time.

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

Protective housing with protruding roof edge by Esser is for all Part No. 7047xx and 7048xx detector housings. It gives an increased mechanical protection as well as protection from bad weather conditions.