The MS-7 series is a family of addressable manual pull stations designed to be installed in the signaling line circuit (SLC) of a Gamewell-FCI addressable fire alarm control panel

The Manual Call Points are designed to provide a manual alarm interface to conventional fire alarm control panel. Manual Call Points offers flexible and break glass element option and available in red, yellow, green and white colour.

The S464F series manual fire alarm pull stations are cost-effective, feature-packed, non-coded manual fire alarm pull stations. Its innovative design, durable construction, and multiple mounting options make it simple to install and operate.

WCP5A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards. The WCP5A series is supplied with both a resistor and normally open clean contact electrical options.

Honeywell's XP95 and discovery bases with insulator have been designed to make it easier for the detectors to be replaced without problems with addressing.

WCP3A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards.

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

MCP Tamper Protection for manual call point Used to prevent unnecessary activation of manual detectors due to vandalism.

Manual Release Trigger is 2-stage manual firing box for firing fire extinguishing systems.

The HAZWP Model Fire Alarm Pull Station is specifically designed for harsh industrial environments where weatherproofing and corrosion are issues.

The JBG-12L series manual fire alarm pull stations are cost-effective, feature-packed, non-coded manual fire alarm pull stations. Its innovative design, durable construction, and multiple mounting options make it simple to install and operate.

IQ8MCP compact IP66/67, small, red, with isolator glass pane

5140MPS manual fire alarm pull stations are designed to be non-code single action devices for use in UL Listed fire alarm applications.

The Gamewell-FCI MS-95/MS-95T Addressable Manual Pull Station is a non-coded, single-action, manual pull station with a key-lock reset feature. Its rugged toggle switch design offers exceptional resistance to accidental alarms

BG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind. They feature a variety of models including single- and dual-action versions.

The Eltek’s Dispos surface wall mounting exit sign luminaires come with the display panes. It has rectangular body with posted line on all sides.

Miniature Momentary Action Push Switches are flush mounted and consist of ABS material. Miniature Push Switches are non-terminated and available in green colour.

Waterproof Call Point by KAC is an IP67 sealed manual call point product. The WCP4A product version is supplied with a double pole changeover set of contacts.

The NRX-WCP radio alarm signalling button is a battery powered radio-frequency device, designed to be used with the NRXI-GATE radio gateway. NRX-WCP is a manual radio alarm signalling point with IP67 degree of protection.

WCP outdoor call points are provided with installation efficiency, flexibility and full compliance with the latest standards. The enhanced environmental protection allows the manual call points to be installed in many external environments.

XP95 Manual Detectors is a Manual Detector with high degree of tightness and protective cover. Alarm can be given without risk of cuts.

KAC’s range of switches provide you with the most comprehensive range of switching product solutions for fire, security and other specialist applications.

MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP

WCP Outdoor Call Point provides Installation efficiency, flexibility and full compliance with the latest standards

Outdoor Manual Call Points are sealed manual call point product. They are supplied with both an LED, resistor and normally open, clean contact electrical options.

SM950B-20C single-action pull stations are non-coded, manual initiating alarm pull stations with normally open contacts. These pull stations also have an additional normally closed contact.

Indoor manual call point with flying leads

M8 triple pole Call Points are ideal for use with security controlled locking systems, and provides a flexible solution for integrated systems which require greater functionality in the access control market.

The MCP6H is specifically designed for indoor applications where temperature and humidity fluctuate in extremes.

The PS-SA pull station is a non-coded, single-action manual pull station with pigtail connections and a key-lock reset feature.

MCP Indoor Call Point by KAC has a unique plug and play concept designed specifically to reduce installation time. Simple, but effective, with no re-termination required and no time wasted.

SK-PULL intelligent pull stations are for use with Silent Knight® Series fire control panels (FACPs).

The Notifier addressable manual pull stations are state-of-the-art, dual-action (i.e., requires two motions to activate the stations) pull stations that includes an addressable interface and the NSP-25 panel.

MCP range by KAC directly reflects the need of installation time and ultimately cost of paramount importance to any fire or security installer by providing a unique ‘plug and play’ concept designed specifically to reduce installation time.

WCP1A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards. The WCP1A series is supplied with both a resistor and normally open clean contact electrical options.

The conventional manual call points with alarm buttons are designed for indoor or outdoor uses in conventional systems such as Eltek's ZLX, ANX and BSX100 systems. They are easy to install and cost-effective.

The Surface Mounted Manual call points by Gent are manufactured from ABS with plastic covered push break glass. This provides the system with safe and simple operation.

GWMPS Series Pull Stations are either single or dual action configurations with terminal strip connections. The normally open contact, which closes when the pull station is activated.

WSK-PULL wireless addressable pull stations are dual action manual pull stations with a key-lock reset feature intended for use with a wireless gateway or wireless fire alarm control panels (FACPs).

SWIFT® W-BG12 addressable wireless pull stations are dual-action, manual pull stations with a key-lock reset feature that provides one addressable alarm initiating input.

WPS-DL SWIFT® wireless pull stations are dual-action devices and have a key-lock reset feature that provides one addressable alarm initiating input.

The BG-12 series manual fire alarm pull stations are cost-effective, feature-packed, non-coded manual fire alarm pull stations. Its innovative design, durable construction, and multiple mounting options make it simple to install and operate.

Addressable manual pull stations are a single action or dual action addressable manual fire alarm pull stations for use with IntelliKnight® fire control panels.

IQ8 manual call points are suitable for esser bus and powered loop connection, with soft address coding, alarm latch and alarm indicator.

Addressable MCP, IP66

MCP3A Indoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards.

MCP2A Indoor Call Ponit

Addressable Pull Stations by Farenhyt are active fire protection devices and are designed to work with Silent Knight IFP-series fire alarm control panels.

The NBG-12LR is Dual-Action Agent Release Stations designed for use with Notifier Fire Alarm Control Panels with releasing capabilities and RP Series Releasing Systems.

The MCP1A product version of Indoor Callpoint is supplied with both a resistor and normally open clean contact electrical options.

Outdoor WCP call points are IP67 sealed manual call point products provided with enhanced environmental protection. WCP call points are true water proof and outdoor products.

The MCP5A product has the Advanced Protocol embedded. This call point has built in isolation.

Addressable Manual Pull Stations are state-of-the-art, dual-action that includes an addressable interface with Intelligent Fire Alarm Control Panels. Control Panels can display the exact location of the activated manual station.

NBG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind.

Call station 586309 is designed to maintain duplex communication between the operator of the VoCALL system and the subscriber on the side of the outdoor panel.

MCP Electronic Modules are available in two types Conventional MCP and IQ8 MCP. MCP Modules use as the detectors in the fire detection and fire alarm systems.

KAC’s new enhanced range of single pole keyswitch devices provides switching solutions for a broad range of applications. These includes fire, security, smoke vent, extinguishant systems and many other specialist applications.

XLS-MPS-SA single-stage manual pull stations are made of high quality, die-cast metal and include screw terminal connections, a hex key for reset, and an integrated break glass rod.

Alertus Two-Way Alerting and Emergency Call Station used for Indoor and Outdoor

The Gamewell-FCI MS95-L series manual pull stations are state-of-the-art, single or dual-action XP95 pull stations that include an XP95 addressable interface for any FCI 600 series FACP. It has highly visible, attractive shape and textured finish.