Control Modules
Velociti® Series Addressable Audio Evacuation Module
Velociti® Series addressable audio evacuation modules control the communications between the command center and the telephone jacks/warden stations.
Velociti® Series addressable audio evacuation modules control the communications between the command center and the telephone jacks/warden stations. Wiring to individual telephone jacks and handsets is supervised and may be configured as 2-wire (Class B) or fault tolerant (Class A). Status is reported to the panel as normal, trouble, or telephone. The modules contain a panel-controlled LED indicator.
Addressable audio evacuation modules are installed in the signaling line circuit (SLC) of the Gamewell-FCI® emergency voice evacuation systems. Addressable audio evacuation modules are designed to fit into a 4-inch (10.16 cm) square junction box. The Velociti® Series use a communication protocol that substantially increases the speed of communication between the SLC devices and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net result is a superior response speed up to five times greater than earlier designs.
Features & Benefits:- Listed under UL® Standard UL 864 and UL2572 for mass notification
- Designed as a compact size to allow easy installation
- Includes a bi-color LED that flashes green whenever the module is addressed, and lights steady red upon activation*
- * Only the red LED is operative in panels that do not operate in Velociti mode
- UL: S1949, 2572 for Mass Notification
- FM: 3023594
- MEA FDNY: 227-03-E, Vol. IV
- CSFM: 7300-1703:0107
- ISO 9001 Certification
Others
- Minimum External Power Supply Voltage
- 24 VDC
- Normal Input Current
- 2.4 milliampere
- Maximum Operating Humidity
- 0.93
- Alarm Current
- 7.5 milliampere
- Maximum Operating Voltage
- 15 - 32 DC volt
- 15 VDC
- For Use With
- Firefighter Phones/Jacks
- Mounting Type
- Wall-Mount
- Maximum IDC Wiring Resistance
- 50 Ohms
- Supported Wiring Configuration
- Class B
Others
- Minimum External Power Supply Voltage
- 24 VDC
- Normal Input Current
- 2.4 milliampere
- Maximum Operating Humidity
- 0.93
- Alarm Current
- 7.5 milliampere
- Maximum Operating Voltage
- 15 - 32 DC volt
- 15 VDC
- For Use With
- Firefighter Phones/Jacks
- Mounting Type
- Wall-Mount
- Maximum IDC Wiring Resistance
- 50 Ohms
- Supported Wiring Configuration
- Class B
- Minimum External Power Supply Voltage : 24 VDC
- Normal Input Current : 2.4 milliampere
- Maximum Operating Humidity : 0.93
- Alarm Current : 7.5 milliampere
- Maximum Operating Voltage : 15 - 32 DC volt|15 VDC
- For Use With : Firefighter Phones/Jacks
- Mounting Type : Wall-Mount
- Maximum IDC Wiring Resistance : 50 Ohms
- Supported Wiring Configuration : Class B
