Power Amplifiers
200W VARIODYN® D1 Power Amplifier
Esser’s VARIODYN® D1 power amplifiers possess two independent amplifier channels, compatible with the VARIODYN® D1 System. It has protection against thermal overload and short-circuits during output. It has temperature controlled ventilation.
Esser’s VARIODYN® D1 power amplifiers possess two independent amplifier channels and 100 V toroidal core output transformers and are compatible with the VARIODYN® D1 System. The power amplifiers are controlled and monitored by the VARIODYN® D1 modules DOM4-8 (Digital Output Module) and DOM4-24. It has integrated electronic protection against thermal overload and short-circuits during output. The two AF inputs and the control input are connected to the VARIODYN® D1 DOM module via a cable.
The two 100 V outputs are connected to the VARIODYN® D1 DOM module via a cable. In the event that the included heat sink reaches a critical temperature, the relay load for this channel will be disconnected and then reconnected upon reaching a safe temperature. It has temperature controlled ventilation.
Features & Benefits:- Integrated electronic protection against thermal overload and short-circuits during output
- Temperature controlled ventilation
- Control and monitoring via DOM
- Independent amplifier channels
- IEC BS EN 60268-3
- 55013, 55020 norms
Others
- Impedance
- >20 k?
- Power Consumption
- 5.2 ampere
- Maximum Operating Humidity
- 90 Percentage
- Main Power Supply Voltage
- 230 50/60 Hz voltage alternating current
- Signal to Noise Ratio
- >105 dB
- Tone Controls
- 6 dB
- Minimum Transmission Frequency
- 50 HTZ
- Non-Linear Distortion
- <0.08 Percentage
- Indicators
- Green Power-LED
- Green Signal-LED
- Red Clip-LED
- Yellow Malfuntion/Failure/Error LED
- Maximum Transmission Frequency
- 22 kHz
- Channels
- 2
- Communication Protocols
- DAL
Others
- Impedance
- >20 k?
- Power Consumption
- 5.2 ampere
- Maximum Operating Humidity
- 90 Percentage
- Main Power Supply Voltage
- 230 50/60 Hz voltage alternating current
- Signal to Noise Ratio
- >105 dB
- Tone Controls
- 6 dB
- Minimum Transmission Frequency
- 50 HTZ
- Non-Linear Distortion
- <0.08 Percentage
- Indicators
- Green Power-LED
- Green Signal-LED
- Red Clip-LED
- Yellow Malfuntion/Failure/Error LED
- Maximum Transmission Frequency
- 22 kHz
- Channels
- 2
- Communication Protocols
- DAL
- Impedance : >20 k?
- Power Consumption : 5.2 ampere
- Maximum Operating Humidity : 90 Percentage
- Main Power Supply Voltage : 230 50/60 Hz voltage alternating current
- Signal to Noise Ratio : >105 dB
- Tone Controls : 6 dB
- Minimum Transmission Frequency : 50 HTZ
- Non-Linear Distortion : <0.08 Percentage
- Indicators : Green Power-LED|Green Signal-LED|Red Clip-LED|Yellow Malfuntion/Failure/Error LED
- Maximum Transmission Frequency : 22 kHz
- Channels : 2
- Communication Protocols : DAL