Isolators
I300 Fault Isolator Module
The Fire Lite I300(A) Fault Isolator Module are used with FireLite’s addressable fire alarm control panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loop.
The Fire Lite I300(A) Fault Isolator Module are used with Fire Lite’s addressable fire alarm control panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loop. The I300(A) should be placed between each device on the SLC loop to isolate a short-circuit problem between the modules. It is required for true Style 7 operation so that other devices can continue to operate normally in the event of a short-circuit on the SLC.
Features & Benefits:- Powered by SLC loop directly, no external power required
- Mounts in standard junction boxes (4.0"/10.16 cm square, 2.125"/5.398 cm deep)
- Integral LED blinks to indicate normal condition. Illuminates steady when short circuit condition is detected
- High noise (EMF/RFI) immunity
Others
- Current Rating
- 450
- Regulatory Approvals
- UL
- Overall Width
- 11.43 MMT
- 11.43 millimetre
- For Use With
- Fire; Lite’s addressable fire alarm control panels (FACPs)
- Overall Height
- 11.43 MMT
- 11.43 millimetre
Others
- Current Rating
- 450
- Regulatory Approvals
- UL
- Overall Width
- 11.43 MMT
- 11.43 millimetre
- For Use With
- Fire; Lite’s addressable fire alarm control panels (FACPs)
- Overall Height
- 11.43 MMT
- 11.43 millimetre
- Current Rating : 450
- Regulatory Approvals : UL
- Overall Width : 11.43 MMT|11.43 millimetre
- For Use With : Fire; Lite’s addressable fire alarm control panels (FACPs)
- Overall Height : 11.43 MMT|11.43 millimetre