Beam Detectors
6500RS Conventional Optical Smoke Beam Detector
6500RS are conventional reflector- type linear optical beam smoke detectors designed to operate as a component of a conventional fire alarm system
The alignment of the detector is simplified with the aid of the detector’s gun sight targeting device. This can be further tuned using the numerical signal strength indicator to set the optimum alignment. The sensitivity of the detector can be set to between 25% and 50% obscuration, providing application flexibility to suit the environment in which the detector will be installed. In addition to the four fixed value alarm thresholds, there are two variable thresholds that automatically compensate for changes in the environment which could otherwise result in unwanted alarms while remaining within a known sensitivity range. The detector incorporates automatic drift compensation, whereby the detector will adjust its detection thresholds in line with any long term signal reduction of the beam caused by contamination of the optical surface. The detector can be adjusted up to 10° vertically and horizontally for alignment. Where greater angular adjustment is required, the multi-mount accessory enables the detector to move through 28° vertically and 360° horizontally when ceiling mounted or up to 23° vertically and 90° horizontally when wall mounted.
Features & Benefits:- Combined transmitter and receiver unit
- 4 x fixed sensitivity/threshold levels
- Numerical indicators to aid beam alignment
- Standby, fault and alarm LED indicators visible from the front and bottom
- ±10° horizontal and vertical beam alignment
- Automatic drift compensation
- Externally powered
- Extended Warranty
- Servo-operated test filter (6500RS)
- EN54-12
Others
- Minimum Operating Humidity
- 0 Percentage
- Maximum Operating Voltage
- 10.2 to 32
- Alarm Contact Ratings
- 0.5 A @ 30 voltage direct current
- Minimum Beam Distance
- 5 metre
- Maximum Standby Current
- 17 milliampere
- Overall Width
- 190 millimetre
- Minimum Operating Ambient Temperature
- 55 degree Celsius
- Overall Height
- 254 millimetre
- Maximum Beam Distance
- 70 metre
- Maximum Operating Humidity
- 95 Percentage
- Maximum Alarm Current
- 38.5 milliampere
- Detection Area
- Linear
- Conventional or Addressable
- Conventional
- Regulatory Approvals
- CPR approved to EN54 – 12:2015; CE
- Material
- Trim- Bayblend FR110, Lens cover- Lexan, Backbox-Noryl
- Detector Type
- Smoke Beam
Others
- Minimum Operating Humidity
- 0 Percentage
- Maximum Operating Voltage
- 10.2 to 32
- Alarm Contact Ratings
- 0.5 A @ 30 voltage direct current
- Minimum Beam Distance
- 5 metre
- Maximum Standby Current
- 17 milliampere
- Overall Width
- 190 millimetre
- Minimum Operating Ambient Temperature
- 55 degree Celsius
- Overall Height
- 254 millimetre
- Maximum Beam Distance
- 70 metre
- Maximum Operating Humidity
- 95 Percentage
- Maximum Alarm Current
- 38.5 milliampere
- Detection Area
- Linear
- Conventional or Addressable
- Conventional
- Regulatory Approvals
- CPR approved to EN54 – 12:2015; CE
- Material
- Trim- Bayblend FR110, Lens cover- Lexan, Backbox-Noryl
- Detector Type
- Smoke Beam
- Minimum Operating Humidity : 0 Percentage
- Maximum Operating Voltage : 10.2 to 32
- Alarm Contact Ratings : 0.5 A @ 30 voltage direct current
- Minimum Beam Distance : 5 metre
- Maximum Standby Current : 17 milliampere
- Overall Width : 190 millimetre
- Minimum Operating Ambient Temperature : 55 degree Celsius
- Overall Height : 254 millimetre
- Maximum Beam Distance : 70 metre
- Maximum Operating Humidity : 95 Percentage
- Maximum Alarm Current : 38.5 milliampere
- Detection Area : Linear
- Conventional or Addressable : Conventional
- Regulatory Approvals : CPR approved to EN54 – 12:2015; CE
- Material : Trim- Bayblend FR110, Lens cover- Lexan, Backbox-Noryl
- Detector Type : Smoke Beam
